Transmitting and receiving system and the gate valve between the spiral

 Overall, the foreign all-

solid-state UV laser technology and applications have been mature, but very expensive. At present, the domestic high-power all-solid-state laser with the highest level on behalf of the Institute of

Physics has developed high-power solid-state laser, all solid-state widely tunable femtosecond lasers, deep ultraviolet to the mid-infrared solid-state lasers. Technology of green laser pointer

with remote control is not influenced by other sorts of signals.The manager has explained the need analysis of green laser pointer
And self-developed all-solid-state high-power red, green, and blue tricolor laser as the light source in the country in 2002 for the first time all-solid-state laser full-color display, 60 front

and rear projection principle demonstrator in 2003, 2005 successfully developed a laser 60 home theater, 84 and 140 large-screen laser display prototype. Took part in 863 "15" major exhibition of

achievements in scientific and technological innovation Exhibition and Shanghai International Industry Fair, Expo Science and Technology Innovation Award. In China, all solid-state UV laser

technology and applications is still in its infancy. We must work towards. When using green laser pointer with remote control, we only need to insert the receiver into the USB interface of the

computer case.Based on the optical principle of the system, the monitoring system must be in the state to receive the optical axis and the emission beam coincide with the center. In order to reduce the labor

intensity of the thermal debugging, cold must be installed to ensure that the beam propagation direction is coincident with the receiver system optical axis. The installation steps are as follows:

connection for transmitting and receiving system to both sides of the gate valve and install the quartz glass. First open the transmitting and receiving system purge institutions on both sides of

the square orifice. Transmitting and receiving system and the gate valve between the spiral wound gasket and the plate separated press Figure YJB-04, YJB-05 for installation. Note the 65mm internal

diameter of the orifice plate is installed at the receiving side, 50mm internal diameter of the orifice plate installed in the side of the launch.