The second generation green laser pointer are characterized

The second generation  green laser pointer  are characterized by the function of flip-over.  High-power CO2 laser tube, with imports of the mirror, focusing lenses, and extended service life. operating speed, the laser energy is adjustable in real time, greatly facilitate the operation of the customer. complete water protection system, effective protection of the life of laser tube. Optional double-headed laser cutting machine, so that the efficiency of doubling.  Optional cellular platform, red positioning system, high-power laser tube.   Hongfan laser cutting machine has passed the comprehensive certification of CE and FDA, more reliable performance.  
The third generation  green laser pointer  are made up of a locator and laser.  The sticky surface wrinkling bubble too much. Move back and forth so that the compression part of the paper has been too much resistance and deformation And backward rotation of the main roller, resulting in shape distortion and sealing. Software settings inappropriate. 3 car belt is too tight; or main roller screw loose; loose or the motor shaft gear, make the car or the main roller Can accurately follow the motor movement caused by the shape distortion and do not seal. 4 shape without distortion but do not seal, software closure compensation value is too small .
May be the knife in the knife block rotation is not smooth with a slight alcohol cleaning tool Bearings; 6. Pressure roller press the paper No pressure in the roll axis; , Why is engraved with the words of different shades, some local backing paper has been broken, but some local tissues has not yet been engraved Through?  The third generation  green laser pointer  can write on the wall of projectors.  A. Tip out the knife block is too long due. Right way: should be transferred to the tip extension knife length 2/3 of the paper thick, Paul Permit a larger pressure would not paper engraved broken.
 Then the regulator knife pressure to ensure that all position paper Carved through. 2 pressure on the already carved a ditch, or a new layering paste is Debu level, the resting pressure of the side of the formation of the bevel on the steps. ,? A software setup inappropriate. A laser pointer type should be selected to support the DM / PL language laser pointer, should be selected similar Models. Another example is the tip of compensation should be close to the small print below (low-speed 1CM can open the tip of compensation, but compensation Value should be reasonable).