Wheel laser pointer for safe operation

The penetrating performance of red portable  green laser pointer  products are not so satisfactory.   Therefore, the purchase is through various channels to understand the problem of after-sales service, for example, the response mechanism, maintenance fees are reasonable. In fact, the purchase is a very simple process, and the choice is really important, and need more inspection. But I remind you that pay attention to in the course of "grasping" living opportunity, learn simple maintenance of equipment, so as to use of laser equipment.  Wheel laser pointer for safe operation. Use wheel laser pointer is used in construction, metal, petrochemical, machinery and metallurgy, and installation of water and other departments.
 Red portable  green laser pointer   have better thermal effects.  When laser pointer on the metal side of flat tubes, square flat steel, beam, slot steel, carbon steel yuan yuan pipe material cutting is prohibited to use the wheel laser pointer to cut wood. Two. Structure: 1. Main parameters: Wheel Laser Pointer Model: J3GY-LD-400A wheel laser pointer main technical parameters: Rated voltage: 380V Motor power: 2.2KW Frequency: 50HZ spindle speed: 2800r.pm cut piece specifications: 400x3.2x32 clamp adjustment range: 0o-± 45o maximum cutting capacity: angle: 100x100x10 round bar: ≤ ф50 channel: 120x53 steel pipe: ф135   Dimensions: 730 (L) x400 (W) x580 (high).
Use and maintenance: 1. Correct way to use: (1) must seriously examine the performance of the equipment, ensure the integrity of the various components. Power switch, the tightness of the cutting disc, shield or safety baffle detailed examination, the console must be stable.  In order to assess the penetrating performance of portable  green laser pointer  products, users should know the properties of target objects. (2) night work should have adequate lighting levels. (3) prior to use, first open the master switch, no-load test to turn laps, to be confirmed that the security is correct before allowing start. Power with the device match the rated voltage.
The operator must view before, so as not to wrong power supply may not be used to rated speed less than 4800 rev / min the blade. (5) must be stable grip laser pointer hand uniform force vertical cut, and the fixed side is solid and reliable.  (6) shall not attempt to cut the saw is not clamping the small workpiece or with edge profiles (such as the outside diameter less than 15 cm). (7) In order to improve the work efficiency. Single or multiple with sawing before, we must make a good auxiliary clamping positioning. (8) shall not be powerful sawing operation, before cutting to wait until the motor speed up to full speed before cutting operation.  In addition, people need to know about the penetrating capacity of the laser from portable  green laser pointer  products of various wavelength.
 cutting does not allow any person standing in the front and side of the laser pointer, power outage, rest or leave the workplace, should be i mmediately cut off the power. (10) Laser pen stall, may not be on hand from the operating handle pine away. (11) shield not in place not to be operated, not hands on less than 15 cm away from the blade. Shall not lean over or around the saw, the operation the body Xiece 45 degrees is appropriate. (12), abnormal sound, i mmediately stop operation, inspection; must first cut off the power before the repair or replacement parts and blade completely stopped.  Red portable  green laser pointer  products which have longer wavelength have better heat effect.